ZHENGYANG MACHINERY EQUIPMENT Co.,Ltd.

Full automatic waste PCB board electronic component dismantling machine

Full automatic waste PCB board electronic component dismantling machine,First of all, let's do a simple introduction on the machine, the machine just as its name implies is used to clear the components on the circuit board and not destroy the circuit board as a whole, it is of a circuit board recycling machine system.

Full automatic waste PCB board electronic component dismantling machine working principle:

Full automatic waste PCB board electronic component dismantling machine is mainly used for demolition of electronic PCB components of computers, televisions and other electronics applications. PCB is 7 resistance heater heated to 250 ℃ molten solder. Inside the drum will lose solder and electronic components by 20 mm * 20 mm screen from the PCB board inside the drum. Then, solder will be sent to you by vibrating screen separation of electronic components 4 mm * 4 mm. Tin recovery rate is 80%, the purity is 60%, and a small piece of welding internal electronic components. Recycle solder will be refined resistance furnace purity of 95%.

Compared with the manual approach

Full automatic waste PCB board electronic component dismantling machine,Automatic equipment operation, high efficiency, low cost, cover the area is small, easy to operate, no dust pollution. PCB from demolished, known as the substrate, can be recycled through physical methods of copper and other non-metallic materials. Removal rate can reach 95%.

The above is a simple introduction about the Full automatic waste PCB board electronic component dismantling machine, if you are interested in our products or want to know more detailed information about it can leave a message or contact us with us.