ZHENGYANG MACHINERY EQUIPMENT Co.,Ltd.

Working Principle of Waste Copper Cable Recycling Machine

Waste copper cable recycling machine, this system includes conveyor, crusher, gravity sorter, air purifier, power distribution cabinet. The whole production line is connected by pipeline, where in the suction air inlet is arranged at the top of the gravity specific gravity vibrating screen and the induced draft fan is connected to the air purifier, the impurity dust in the separation process is recovered. The crusher is separated from the wire by the screw conveyor structure to the specific gravity sorting machine through the vibrating screen. This machine overcomes the defects of the existing waste wire and cable recycling treatment device with small output, low automation, large secondary pollution and low metal recovery rate.

In addition, the waste copper cable recycling machine is easy to operate, and can be fed once. After the crushing process, it is directly fed to the separation equipment. When the material is being cut, the automatic feeding device controls the uniform speed of the material to prevent the separation speed from affecting the separation effect] dry separation. Copper and plastic can be completely separated and used for comprehensive utilization. No dust, no secondary pollution, and high recovery economic benefits, and a high-speed copper plastic recycling treatment. In addition, the gravity separation equipment adopts the latest technology, and the vibration sorting principle adopted is as follows:

Under the action of the wind, the two kinds of different density materials are deflected by the amplitude movement on the screen surface, so that the dense copper wire is pressed against the screen to face the copper outlet, and the plastic skin with small density floats. The copper wire flows over the skin. Thereby achieving the purpose of copper plastic separation. The cleanliness of the separation is proportional to the diameter of a single copper wire. The thicker the single diameter, the cleaner the copper wire is separated from the plastic, and the thinner the single diameter, the worse the separation of the copper wire from the plastic. However, through the modification, the waste copper cable recycling machine has been able to achieve a sorting rate of over 99.5%.